Kenwood HM-353V - Manual (Page 4)

4
Before applying power
Preparation section
FM indoor antenna (1)
Accessories
AM loop antenna (1) Remote control unit (1)
Batteries (R6/AA) (2)
Unpacking
Unpack the unit carefully and make sure that all the accessories are present.
If any accessories are missing, or if the unit is damaged or fails to operate, notify your dealer immediately. If the unit was
shipped to you directly, notify your shipper immediately. Kenwood recommends that you retain the original carton and
packing materials in case you need to move or ship the unit in the future.
Keep this manual handy for future reference.
Please confirm that the following accessories are present.
AC plug adaptor (1)
Use to adapt the plug on the power
cord to the shape of the wall outlet.
(Accessory only for regions where use
is necessary.)
Video Cord (1)
This unit is equipped with a demonstration function (only display). The demonstration consists of se-
quential change of display and indicators showing the operations, but the audio itself does not change.
The demonstration function can be cancelled as follows.
÷ This operates automatically when a power failure
has occurred or the plug of the power cable has
been pulled while the power was ON.
In regard to demonstration
"DEMO ON" (To execute demonstration):
After turning power ON, press and hold the set/
demo key (for more than 2 seconds).
"DEMO OFF" (To cancel demonstration):
Press the set/demo key during demonstration.
STOP
AUTO PAL NTSC
CD SELECT TUNER BAND
RC-M0304V
N E X T P R E V .
MULTI PLEX
AUTO PBC
CLEAR
SET
AUTO/MONO PGM
ON SCREEN
TIME
ENTER
POWER
FREEZE
DIGEST
9
6
3
TONE
STEP
0
8
5
2
RANDOM
SOUND
TUNING
REC RETURN
SLOW
RESUME
10
7
4
1
REPEAT
SLEEP
MUTE
O.T.E.
TIMER
TAPE
VOLUME
AUX
TIME SEARCH
P. CALL P. CALL
TAPE EQ.
set / demo