Kenwood TM-D710A - Manual (Page 49)

43
SPECIFICATIONS
Specifications are subject to change without notice due to advancements in
technology.
General
TM-D710A TM-D710E TM-D710A
K Type E Type M4 Type
Guaranteed
range
Band
A & B
TX & RX
144 ~ 148 MHz 144 ~ 146 MHz
438 ~ 450 MHz 430 ~ 440 MHz
Frequency
range
Band A
RX
118 ~ 524 MHz —
Band B
136 ~ 524 MHz —
800 ~ 1300 MHz
(K type: excluding cellular band)
—
Mode F1D/ F2D/ F3E
Antenna impedance 50 Ω
Operating temperature range –20°C ~ +60°C (–4°F ~ +140°F)
Power requirement 13.8 V DC ±15% (Negative ground)
Frequency stability Within ±5 ppm (–10°C ~ +50°C)
Current
TX
VHF
Hi Less than 13.0 A —
Mid Less than 5.5 A Less than 9.0 A
Low Less than 4.0 A
UHF
Hi Less than 13.0 A —
Mid Less than 6.5 A Less than 9.0 A
Low Less than 5.0 A
RX Less than 1.2 A (at 2W audio output)
Dimensions
(W x H x D)
Without projections
Operation panel: 155 x 70 x 38 mm (6.20" x 2.80" x 1.52")
TX/ RX unit: 140 x 43 x 142 mm (5.60" x 1.72" x 5.68")
With projections
Operation panel: 156 x 71 x 56 mm (6.24" x 2.84" x 2.24")
TX/ RX unit: 140 x 44 x 158 mm (5.60" x 1.76" x 6.32")
Weight (approx.)
Operation panel: 0.3 kg (0.66 lbs)
TX/ RX unit: 1.2 kg (2.64 lbs)