Kenwood ProTalkXLS TK-3230 - Manual (Page 30)


 Press the MENU key then press or to select “ ”
(VOX function off) or “ ” (VOX gain level 1) to “ ”
(VOX gain level 5).
• While adjusting the VOX Gain level, speak into the
microphone. When an appropriate level is reached, the LED
lights orange.
• Setting the VOX gain level to OFF deactivates VOX. In order
to transmit with VOX turned off, you must use the PTT switch.
 Press the MENU key to exit the selection.
 Press the PTT, MON, or CAL key to exit Setting Mode.
voX d
elAy
t
ime
If the transceiver returns to receive mode too quickly after
you stop speaking, the end of your message may not be
transmitted. To avoid this, select an appropriate delay time that
allows your entire message to be transmitted. However, do not
make the delay overly long.
 With the transceiver power OFF, press and hold the MENU
key while turning the transceiver power ON (for 1 second).
 Press the or key to select “ ”.
 Press the MENU key then press or to select “ ”
(0.1 seconds), “ ” (0.3 seconds), “ ”
(0.5 seconds), “ ” (1 second), “ ” (1.5 seconds),
or “ ” (3 seconds).