Kenwood ProTalkXLS TK-3230 - Manual (Page 43)


 Press the MENU key to exit the selection.
 Press the PTT, MON, or CAL key to exit Setting Mode.
Note: Transceiver's individual ID number is not available for
selection as PTT ID.
■
ptt id S
ide
t
one
When the PTT switch is pressed and/or released, a tone
will sound through your own speaker when the PTT ID is
transmitted.
To turn the PTT ID Side Tone on or off:
 With the transceiver power OFF, press and hold the
MENU key while turning the transceiver power ON (for
1 second).
 Press the or key to select “ ”.
 Press the MENU key then press or to select
“ ” (PTT ID Side Tone is on) or “ ” (PTT ID
Side Tone is off).
 Press the MENU key to exit the selection.
 Press the PTT, MON, or CAL key to exit Setting Mode.