Kenwood ProTalkXLS TK-3230 - Manual (Page 38)


 Press the MENU key then press or to select “ ”
(selcall).
 Press the MENU key to confirm the selection.
 Press the PTT, MON, or CAL key to exit Setting Mode.
Step : Set up your own ID (ID List setting mode for Selcall)
 With the transceiver power OFF, press and hold the CAL
key while turning the transceiver power ON (for 1 second).
• A beep will sound and the transceiver will enter ID List Setting
mode.
 Press the or key to select a list ID number.
 Press the MENU key then press or to select “ ”
(own ID).
• The default own ID setting is 01.
• When setting up your own ID, make sure that each member
within your group sets up a unique ID number for their own
ID. If an own ID number is duplicated, that transceiver cannot
perform selcalls.
• “ ” represents an Individual Call ID.
“ ” represents a Group Call ID.
“ ” represents a Broadcast Call ID.
“ ” represents your own ID number.
“ ” clears the selected ID data.
 Press the MENU key to confirm the selection.