Kenwood ProTalkXLS TK-3230 - Manual (Page 32)


voX p
roceed
t
one
You can set the transceiver to sound an alert tone when you
are able to transmit (transmission is no longer inhibited).
 With the transceiver power OFF, press and hold the MENU
key while turning the transceiver power ON (for 1 second).
 Press the or key to select “ ”.
 Press the MENU key then press or to select “ ”
(VOX proceed tone on) or “ ” (VOX proceed tone off).
• You can speak into the microphone at this time to simulate
transmitting. The LED lights orange while speaking if your
voice is at an appropriate level, but no signal is transmitted at
this time.
 Press the MENU key to exit the selection.
 Press the PTT, MON, or CAL key to exit Setting Mode.