Kambrook KFP100 - Manual (Page 6)


USING YOUR KAMBROOK DUAL
FOOD PROCESSOR & BLENDER
Before first use remove and safely discard any
promotional labels and wash the blender jug, food
processor bowl and all blades in warm, soapy water.
Dry thoroughly.
 all Blades must Be handled carefully as they are
sharp!
Place the motor base on a level, flat surface.
ASSEMBLY AND OPERATION OF THE
FOOD PROCESSOR
Your Dual Food Processor & Blender features 3
safety locking devices.
NOTE: THE FOOD PROCESSOR WILL NOT WORK
UNLESS ALL OF THE BELOW ARE IN PLACE:
The blender drive cover is correctly LOCKED into
position
The processor bowl is correctly LOCKED into
position
The processor lid is correctly LOCKED into position
NOTE: Always ensure that the Dual Food Processor
& Blender is disconnected from the power outlet and
operating dial is turned to ‘0’ before assembling or
disassembling the Dual Food Processor & Blender.
Correct locking procedure of the
Blender Drive Cover
Place cover over drive with the arrow on the
drive cover aligned to the align arrow on the
motor cover. Turn clockwise until the arrow on the
drive cover is aligned with lock arrow
on the
motor cover.
Note the food processor will not operate unless the
blender drive cover is locked in the correct position
1.
2.
3.
Correct placement of the Processor
Bowl
Place the empty bowl onto the base, with the handle
on your right align the arrow
on the processor
bowl handle with the align arrow on the
motor base. Turn the bowl clockwise until the arrow
on the processor bowl handle is aligned with the
‘lock’ indicator arrow
on the motor base.
KFP100_FOODPROC_IB_FA.indd 6 29/5/09 4:27:57 PM