Kambrook KFP100 - Manual (Page 8)


Turn the lid clockwise – moving the ‘lid locking tab’
into the slot near the top of the motor unit - until the
indicator line on the lid is aligned with the circle
on the top of the bowl. A “click” sound will be heard,
to indicate is correctly fitted.
NOTE: The Dual Food Processor & Blender will not
operate unless the processing bowl, lid and blender
drive cover are correctly locked into position.
Ensure the speed dial is in the ‘OFF’ position.
Insert power plug into a 230/240 volt power outlet.
Turn power on.
The processor is now ready to use.
To begin processing/slicing/grating turn the ‘Power
Control Dial’ from the ‘OFF’ position to either
the Low, Medium or High speed, depending your
requirements. The speed can be changed at any
time during the process.
For short bursts of power, whilst processing, use the
“PULSE” setting.
For slicing and grating – ensure that the food
items you want to slice or grate are of a suitable
size to be feed through the food chute.
Place the food inside chute and push down with the
‘food pusher’.
NOTE! : Never push down any foods with your hands
and do not put your hands down the food chute at
any time during processing.
For using the processing blade – with the
ingredients inside the processor bowl, start the
unit on low speed moving to high if necessary.
Before commencing ensure that the ‘food pusher’
is in place to avoid splashing from the food chute.
Ingredients can be added through the food chute
whilst processing.
If ingredients stick to the sides of the processor
bowl during processing, turn the speed to the ‘OFF’
position, switch off at the power outlet, remove lid
and then push the food back onto the blades using
the plastic spatula to scrape down the sides of the
bowl. Then recommence processing.
NOTE: Do not over fill the processor bowl past the
MAX line for solids and past the 750ml mark for
liquids. For greater quantities of liquids the blender
jug should be used.
When processing is complete, turn to the ‘OFF’
position. Wait until blades have stopped rotating
before removing the lid, blades or processor bowl.
ASSEMBLY AND OPERATION OF THE
BLENDER
Your Dual Food Processor & Blender features 2
safety locking devices.
NOTE: the blender will not operate unless:
The blender jug is correctly positioned and
LOCKED onto the motor base
The processor bowl AND lid are correctly locked
into place (refer to previous instructions)
NOTE: The food processor will not operate while
the blender jug is assembled to base. If processing
is required, remove the blender and fit the Blender
Drive Cover.
1.
2.
✓
Lid
locking
tab
Insert slot
KFP100_FOODPROC_IB_FA.indd 8 29/5/09 4:27:59 PM