Lock function, Beep function, Assigning functions – Kenwood TS-870S User Manual

Page 70: Using the programmed buttons, 11 operator conveniences

Advertising
background image

64

USB

F. LOCK

AGC

AUTO

ASSIGNING FUNCTIONS

1 Press [MENU].

2 Turn the M.CH/VFO.CH control to select Menu

No. 45, 46, 47, or 48.

3 Press [UP], or [DOWN], or Mic [UP], or Mic [DWN]

to change the current selection for this Menu item.

4 Press [MENU] or [CLR] to exit from Menu mode.

If the power is switched OFF before this step is
completed, the selection just made will be
canceled.

USING THE PROGRAMMED BUTTONS

Press one of the buttons labeled ENTER, TF-SET,
1MHz, or FINE.

The assigned function activates.

Note:

After a Partial or Full Reset, the settings of the PF keys are

reset to default values.

LOCK FUNCTION

The Lock function disables some buttons to prevent you
from accidentally activating a function or disturbing
current settings.

Press [F.LOCK] to toggle the Lock function ON or OFF.

“F.LOCK” lights when the Lock function is ON.

The following buttons and controls are NOT affected by
activating the Lock function:

Note:

Even after Lock has been activated, you can still use the

Tuning

control with [TF-SET] to change your transmit frequency

when operating split frequency.

BEEP FUNCTION

The purpose of the Beep function is to provide an
audible signal that conveys information. There are two
types of signals:

To confirm that a button has been pressed

To report an error condition

The volume of the beep output can be selected via
Menu No. 38 (BP LV). If you prefer not to hear any
beeps, the function can be silenced via Menu No. 35
(BEEP). The following paragraphs explain more about
each type of signal.

11 OPERATOR CONVENIENCES

OFF

00 ~ 68

69

70

71

72

73

Menu/

Function No.

Function

Page

Ref.

No function assigned

See "MENU

CONFIGURATION"

ENTER

TF-SET

1MHz

FINE

VOICE

_

25

22

43

20

21

68

[ANT]

ATT˚[DOWN]

ATT˚[UP]

[AIP]

[AT˚TUNE]

[AUTO˚NOTCH]

[BEAT˚CANCEL]

[CLEAR]

[FULL/SEMI]

[METER]

[N.R.]

[ ] (POWER)

[RIT]

[SEND]

[TF-SET]

[THRU/AUTO]

[TX˚EQ.]

[VOICE]

(if assigned to a PF key)

[VOX]

[XIT]

AF

AGC

CAR

DELAY

KEY˚SPEED

MIC

MONI

NB

PROC

PWR

RF

RIT/XIT

SQL

Buttons NOT Locked

Controls NOT Locked

Advertising