Heavy equipment, Hot parts, Moving parts – Kohler Generator Sets 20--2800 kW User Manual

Page 9

Advertising
background image

TP-5700 7/93

V

Safety Precautions and Instructions

Servicing

the

transfer

switch

controls and accessories within the
enclosure. Hazardous voltage can
cause

severe

injury

or

death.

Disconnect the transfer switch controls
at the inline connector to deenergize
the circuit boards and logic circuitry but
allow the transfer switch to continue to
supply power to the load. Disconnect
all power sources to accessories that
are mounted within the enclosure but
are not wired through the controls and
deenergized

by

inline

connector

separation.

Test circuits with a

voltmeter to verify that they are
deenergized before servicing.

Heavy Equipment

Unbalanced weight.
Improper lifting can cause severe
injury or death and equipment
damage.

Do not use lifting eyes.
Lift the generator set using lifting bars
inserted through the lifting holes on
the skid.

WARNING

Unbalanced weight.
Improper lifting can cause severe
injury or death and equipment
damage.

Use adequate lifting capacity.
Never leave the transfer switch
standing upright unless it is securely
bolted in place or stabilized.

WARNING

Hot Parts

Hot coolant and steam.
Can cause severe injury or death.

Before removing the pressure cap,
stop the generator set and allow it to
cool. Then loosen the pressure cap
to relieve pressure.

WARNING

Hot engine and exhaust system.
Can cause severe injury or death.

Do not work on the generator set until
it cools.

WARNING

Servicing the exhaust system. Hot
parts can cause severe injury or
death. Do not touch hot engine parts.
The

engine

and

exhaust

system

components become extremely hot
during operation.

Checking the coolant level.

Hot

coolant can cause severe injury or
death.

Allow the engine to cool.

Release pressure from the cooling
system before removing the pressure
cap. To release pressure, cover the
pressure cap with a thick cloth and then
slowly turn the cap counterclockwise to
the first stop. Remove the cap after
pressure

has

been

completely

released and the engine has cooled.
Check the coolant level at the tank if the
generator set has a coolant recovery
tank.

Moving Parts

Hazardous voltage.
Can cause severe injury or death.

Operate the generator set only when
all guards and electrical enclosures
are in place.

Moving rotor.

WARNING

Rotating parts.
Can cause severe injury or death.

Operate the generator set only when
all guards, screens, and covers are in
place.

WARNING

Servicing the generator set when it
is operating. Exposed moving parts
can cause severe injury or death.
Keep hands, feet, hair, clothing, and
test leads away from the belts and
pulleys when the generator set is
running. Replace guards, screens, and
covers before operating the generator
set.

Advertising