Recording by groups (group), Application md edit functions – Kenwood MICRO HI-FI COMPONENT SYSTEM HD-5MD User Manual
Page 47
HD-5MD/EN
47
Application
MD Edit Functions
Recording by groups (GROUP)
As this unit permits long-play recording with 2x and 4x of the standard capacity, a large number of tracks
can be recorded onto one MD. When setting for group recording is done before MD O.T.E. recording (page
42), recording by groups, for example by artist or by album, becomes possible. These groups also can be
selected for playback, editing by group, repeat [playback, etc.
Grouping also can be done for a recorded MD. (
i)
1
4
3
6
7
2
1
4
3
2
5
6
7
5
16
18
21
22
17
20
19
21
22
20
8
1
4
3
2
6
7
5
6
7
5
1
2
3
4
5
6
7
8
9
10
O.T.E.
Group recording image
Image of division into groups
CD
MD
Group 1
Group 2
Group 3
Group 1
Group 2
Group 3
Group 8
Main unit only
1 Select "GROUP MAKE ?" as follows.
1 Press the "menu" key.
2 Select "GROUP MAKE ?" with the "vol-
ume/multi control" knob.
3 Press the "set" key.
2 Select "GROUP MAKE ON" as follows.
1 Select "GROUP MAKE ON" with the "vol-
ume/multi control" knob.
2 Press the "set" key.
3 Perform the operation for "All tracks of a
CD can be recorded by one-touch record-
ing (normal speed, 4x speed) (all tracks
O.T.E.)" and start recording. (
w)
When the "volume/multi control " knob is turned, switching
is done as follows.
Return to the original status is made when no operation
is performed within 20 seconds.
"MD REC MODE ?"
"GROUP MAKE ?"
"REC SPEED ?"
"REC LEVEL ?"
"DIMMER ?"
÷ The group recording setting remains unchanged until
it is changed again.
÷ All tracks from the track with which O.T.E. recording
was started to the last recorded track will be one group.
÷ When the MD to be used for the recording already has
99 groups registered, group recording will not be
executed even when the group recording setting is ON.
÷ When an MD recorded on different equipment
compatible with the group function is used on this
unit, it may not operate correctly.
÷ When an MD with group recording is played on
equipment not compatible with the group function,
the tracks will be played in the order in which they
have been recorded.
÷ When an MD with group recording is edited on other
equipment, it may not operate correctly.