Kenwood MICRO HI-FI COMPONENT SYSTEM HD-5MD - Manual (Page 55)

HD-5MD/EN
55
Application
MD Edit Functions
ENTER
4 ¢
P.CALL
SET
SET
L
R
30 10 5 3 1 0 (–dB)
MD
DIGITAL
L
R
30 10 5 3 1 0 (–dB)
MD
DIGITAL
L
R
30 10 5 3 1 0 (–dB)
MD
DIGITAL
3 Press the "SET" key and start pre-
view playback.
4 Press the 4P.CALL¢ keys
and select the division point.
5 Press the "SET" key to deter-
mine the division point.
6 Press "ENTER" to determine
the division.
The steps
1 to 6 can be re-
peated to divide a track into a
maximum of 254 tracks.
8 After editing has been com-
pleted, press the
0 key to eject
the minidisc.
(Main unit)
Even after minidisc editing has been completed, it is possible to delete the editing up to that point and to
return to the condition at the time of disc insertion.
‰
When fine adjustment of the division point with
preview playback is not done, press the SET key
after step
2 to determine the division point.
(Step
5)
÷ The approximately 3 seconds following the pause
point will be played back repeatedly.
÷ Each time a key is pressed, the division point is moved
one step (6/100 sec) forward or back. (Fine adjustment
is possible in the range from -31 to +31 steps.)
The editing may be aborted when the MD is removed or
the power is switched off while "EDIT NOW" is being dis-
played.
÷ The unit pauses at the beginning of the track created
newly by the division.
÷ The editing may be aborted when the MD is removed or
the power is switched off while "EDIT NOW" is being
displayed.
While "MD WRITING" is displayed, information
is being written to the minidisc, and the unit
should not be subjected to vibrations or shocks.
÷ Remove the minidisc after the editing information has been
written to the minidisc with display of "MD WRITING".