Kenwood MICRO HI-FI COMPONENT SYSTEM HD-5MD - Manual (Page 79)

HD-5MD/EN
79
Application
Specifications
[Amplifier section]
Effective output power during STEREO operation
(1 kHz, 10% T.H.D., at 6 Ω) ................. 25 W + 25 W
Rated output power during STEREO operation (DIN)
(1 kHz, 0.7% T.H.D., at 6 Ω) ................. 20W + 20 W
Frequency response .......... 30Hz ~ 60kHz (+0dB, -3dB)
[MD recordre section]
Laser ....................................... Semiconductor laser
D/A Conversion .............................. 1 Bit D/A converter
Sampling frequency ........................................ 44.1 kHz
Audio compression ............................ ATRAC, ATRAC3
Digital input
Optical .......................................... -15dBm ~ -21dBm
[CD player section]
Laser ....................................... Semiconductor laser
D/A Conversion .............................. 1 Bit D/A converter
Over sampling ....................................... 8 fs (352.8 kHz)
Frequency response ....... 20Hz ~ 20kHz (+0.5dB, -1dB)
Digital output
Optical .......................................... -15dBm ~ -21dBm
[Tuner section]
FM tuner section
Tuning frequency range ......... 87.5 MHz ~ 108 MHz
AM tuner section
(For U.K. and Europe)
Tuning frequency range .......... 531 kHz ~ 1,602 kHz
(For other countries)
Tuning frequency range
9 kHz step ............................ 531 kHz ~ 1,602 kHz
10 kHz step .......................... 530 kHz ~ 1,610 kHz
Main unit
Enclosure ... Bass-reflex type (Magnetically shielded)
Speaker configuration
Woofer ...................................... 120 mm, cone type
Tweeter ..................................... 25 mm, dome type
Impedance ................................................................ 6 Ω
Maximum input power ......................................... 60 W
Dimensions ................................................... W: 155 mm
....................................................................... H : 270 mm
....................................................................... D : 263 mm
Weight (net) ............................................. 4.5kg (1 piece)
KENWOOD follows a policy of continuous ad-
vancements in development. For this reason
specifications may be changed without notice.
÷ Sufficient performance may not be exhibited
at extremely cold locations (where water
freezes).
Speakers
[General]
Power consumption .............................................. 70 W
Dimensions .................................................. W: 220 mm
....................................................................... H : 145 mm
....................................................................... D : 356 mm
Weight (net) .......................................................... 6.8 kg