Kenwood MICRO HI-FI COMPONENT SYSTEM HD-5MD - Manual (Page 51)

HD-5MD/EN
51
Application
MD Edit Functions
P.MODE
PERV.–GROUP–NEXT
MD
6
GROUP
PERV.–GROUP–NEXT
7
STOP
AUTO/MONO
P.MODE
GROUP
L
R
30 10 5 3 1 0 (–dB)
MD
DIGITAL
GROUP
L
R
30 10 5 3 1 0 (–dB)
MD
DIGITAL
Group selection for playback
A group of the MD can be selected to play only the
tracks of that group
Remote control unit only
Select MD and obtain stopped condition.
1 Press the P.MODE key to light
the "GROUP" indicator.
2 Press the "GROUP PREV.",
"NEXT" keys to select the
group to be played.
3 Press the MD 6 key to start
playback.
For a minidisc with group settings, the mode will change
as shown below each time the "P.MODE" key is
pressed.
Lit
1 Group mode
2 Program mode
3 Cancel
The characters will scroll.
When an MD with group recordings is played
on equipment not compatible with the group
function, numbers or symbols may be dis-
played in the disk name and correct display may
not be possible. In such a case, it should be
noted that the group information will be lost
when the disk name is edited on such equip-
ment not compatible with the group function.
÷ When an MD recorded on different equip-
ment compatible with the group function is
used on this unit, it may not operate correctly.
Playback of a different group during playback To stop group playback
2 Press the "GROUP PREV.",
"NEXT" keys to select the
group to be played.
A group also can be selected for repeat playback
or random playback of that group.
Repeat mode °
Random mode ·
Remote control Main unit
Return to normal playback
Press the "P.MODE" key repeatedly while in
stop condition, until "GROUP" goes out.