Kenwood MICRO HI-FI COMPONENT SYSTEM HD-5MD - Manual (Page 66)

HD-5MD/EN
66
Application
As the clock is not only used to show the time of
the day but also used in timer operations, be sure
to set the clock in advance.
Clock adjustment
If you have made a mistake during the setting,
start again from step
1.
1 Select "TIME ADJUST ?" as follows.
1 Press the "menu" key.
2 Select "TIME ADJUST ?"
with the "volume/multi con-
trol" knob.
"MD REC MODE ?"
"GROUP MAKE ?"
"TIME ADJUST ?"
"DIMMER ?"
1
2
3
Return to the original status is
made when no operation is per-
formed within 20 seconds.
Main unit only
2 Turn the "volume/multi control" knob to
select "12H ?" (12-hour display) or "24H ?"
(24-hour display) and press the "set" key.
3 Turn the "volume/multi control" knob to
adjust the "hour" setting.
When "hour" has set, press the "set" key.
4 Turn the "volume/multi control" knob to
adjust the "minute" setting.
When "minute" has set, press the "set"
key.
AM
L
R
30 10 5 3 1 0 (–dB)
MD
DIGITAL
AM
L
R
30 10 5 3 1 0 (–dB)
MD
DIGITAL
L
R
30 10 5 3 1 0 (–dB)
MD
L
R
30 10 5 3 1 0 (–dB)
MD
÷ When the "set" key in step 4 is pressed with
a time signal, accurate setting can be made.