Kenwood MICRO HI-FI COMPONENT SYSTEM HD-5MD - Manual (Page 52)

HD-5MD/EN
52
Application
MD Edit Functions
TRACK EDIT
4 ¢
P.CALL
SET
L
R
30 10 5 3 1 0 (–dB)
MD
DIGITAL
A
1
B
2
C
3
D
4
E
5
F
6
G
7
A
1
B
2
E
3
C
4
D
5
F
6
G
7
SET
L
R
30 10 5 3 1 0 (–dB)
MD
DIGITAL
Moving individual tracks (MOVE)
Tracks can be moved to (inserted at) any desired position. When the rearrangement has been completed,
all track numbers automatically will be renumbered consecutively. Changing to the desired track order
is possible by repeated MOVE operations.
Tracks divided into groups also can be moved. In that case, the track will be registered with the same
group as the immediately preceding track at the new position. When the immediately preceding track at
the new position is not registered to a group, the moved track also will not belong to any group.
Image for individual moving of tracks
Select a track to be
move
Perform the operation after the display of
"GROUP" and "PGM" has been extinguished.
Remote control unit only
1 Press the "TRACK EDIT" key.
2 Confirm that "EDIT TRACK" is
being displayed and press the
"SET" key.
3 Press the 4P.CALL¢ keys re-
peatedly to select "MOVE ?".
4 Press the ENTER key to deter-
mine the "MOVE".
÷ When the editing is to be abandoned, press
the "TRACK EDIT" key to stop the editing and
to return to the original condition.
÷ When an item which cannot be edited is se-
lected, an will be shown at the beginning
of the display.
÷ MD edit mode is reached.
Return to the original status is made when no opera-
tion is performed within 20 seconds.
÷ When something else is being displayed, press the
4 P.CALL ¢ keys to switch, and then press the
"SET" key.
Continued on next page
Select the movement
destination