Kettler FB600 - Manual (Page 13)

Short description
The electronics assembly is equipped with functions with
keys and a display range (display) with variable symbols
and graphics.
Quick reference guide
Functions
The four keys will be described in short below.
A detailed application description can be found in the
respective chapters. The names of the function keys in the
chapters correspond to the names used in this quick refe-
rence guide.
SET (press shortly)
Input data are accessed with this function key.
The set data are accepted.
Reset (press SET longer)
The current display is deleted for a reset.
Minus – / Plus +
With these function keys, you can change the values in
the different input data before the start of the training.
- press longer > fast run through the values
- press “Plus” and “Minus” together: value input skips to
OFF
RECOVERY
You can start the recovery pulse function with this function
key.
Pulse measurement
Pulse measurement can be achieved via three sources:
1. ear clip – connect the plug with the plug socket
2. hand pulse – the connection is situated at the back of
the display
3. breast belt (accessories) – please observe the corre-
sponding instructions
display range
display
functions
keys
G
G
13
GB