Kyocera KM-C1530 - Manual (Page 124)

6 Advanced Operations
6-12 KM-C1530
6.3 Staple Binding
If an optional finisher (F-8110 or F-8430) and a printer controller are
installed, grouped or sorted printouts from a computer can be stapled
together. The type of stapling depends on the model of the finisher
installed.
✎
Note
If finisher F-8110 is installed, the pages can only be stapled in the
corner.
Types of stapling
The pages are bound either with one staple in the corner (parallel or
diagonally) or with two staples.
Whether the staple in the corner is positioned parallel or diagonally
depends on the orientation of the print image and the feeding direction of
the paper.
● Corner stapling (Parallel):
The printed pages are bound with
one staple parallel to the edge of the
paper.
● Corner stapling (Diagonal):
The printed pages are bound with
one staple diagonally in the corner
of the pages.
● 2-Point stapling (only with finisher
F-8430 installed):
The printed pages, positioned
according to the specified paper
orientation, are bound with two
staples at the center, parallel to the
edge of the pages.