Kyocera KM-C1530 - Manual (Page 98)

5 Basic Operations
5-10 KM-C1530
4 Adjust the paper guides to the size
of the paper, and then load the
paper so that the front side of the
paper faces down. Lightly slide the
paper into the feed slot as much as
possible so that it is ready to be fed
into the copier.
? Are the recommended overhead
projector transparencies being
used?
➜ When using the recommended
overhead projector transparencies, load them as described on
page 3-17.
5 Make sure that the screen that
allows you to select the manual
bypass tray paper size is displayed,
check that the desired paper size is
selected, and then touch [Paper
Type].
6 Touch [OHP Film], and then touch
[Enter].
7 Specify any other necessary settings.
❍ Zoom (Refer to page 5-14 for more details.)
❍ Original Image Type (Refer to page 5-18 for more details.)
❍ Density (Refer to page 5-20 for more details.)
8 Press the [Start] key.