Kyocera KM-C1530 - Manual (Page 200)

8 Administrator Mode Operations
8-30 KM-C1530
❍ Check that the left margin of the
printed test pattern is 3.0 mm.
❍ If the left margin is not as
specified, touch
and to
adjust it, and then touch [Enter].
Setting a higher positive number
makes the margin wider; setting
a higher negative number
makes the margin narrower.
❍ Repeat step 3 until the left
margin meets its specification.
? What is the standard setting?
➜ Before adjusting the third or
fourth paper drawer, enter the
same adjustment value for the first or second paper drawer and
check the test pattern.
4 In the Expert User’s Mode screen, touch [Exit].
5 In the Administrator Mode screen, touch [Exit].
6 In the Utility screen, touch [Exit].
b: 3.0 mm ± 1.0 mm
b