Kyocera KM-C1530 - Manual (Page 151)

Utility Mode Operations 7
KM-C1530 7-1
7 Utility Mode Operations
7.1 Resetting the Copier (“Default Settings” Function)
This function allows you to specify which settings would to be used as the
default settings when the copier is reset by turning it on or pressing the
[Panel Reset] key. The default setting is “Factory Settings”.
To specify the default settings
1 Press the [Utility] key to enter Utility
mode.
2 Touch [Default Settings].
3 Select the desired setting, and then
touch [Enter].
? Do you wish to record the
current settings as the default
settings?
➜ Touch [Current Settings].
4 In the Utility screen, touch [Exit].