Kyocera KM-C1530 - Manual (Page 165)

Utility Mode Operations 7
KM-C1530 7-15
To set the “Auto Panel Reset” parameter
This parameter can be used to turn off (“OFF”) the panel reset, or to
specify the length of time (between 1 and 9 minutes) after the last
operation until the touch panel automatically returns to its default settings.
The default setting is “1 min.”
1 In the User’s Choice screen, touch
[Auto Panel Reset].
2 Using the keypad, enter the desired
number of minutes, and then touch
[Enter].
? Do you wish to change the
number of minutes entered?
➜ Press the [C] (clear) key to
erase the entered number, and
then use the keypad to enter the
correct number of minutes.
3 In the User’s Choice screen, touch [Exit].