Kyocera KM-C1530 - Manual (Page 127)

Advanced Operations 6
KM-C1530 6-15
6.4 Hole Punching (“Hole-Punch” Setting)
If an optional finisher (F-8430) and a printer controller are installed, holes
for filing the pages in binders can be punched in printouts sent from a
computer.
Types of hole punching
The number of holes punched (either two or three) is automatically
selected according to the paper size and the paper feed method.
● Number of holes punched: 2
Possible paper sizes: LetterL,
LegalL
Possible paper types: Standard
paper (17 to 24 lbs.)
● Number of holes punched: 3
Possible paper sizes: LetterC,
11 × 17L
Possible paper types: Standard
paper (17 to 24 lbs.)
Punched hole position:
The position of the punched hole differs according to the printed image
and paper orientation.
● Possible paper sizes: LetterL, LetterC, LegalL, 11 × 17L
3
3
LegalL
11 × 17L
LetterC
LetterL