Kodak SCIENCE 1H9659 - Manual (Page 118)

Kodak XLS 8600 and Kodak DS 8650 Printers
A–6 September 1997 Part No. 1H9659
The Printer Setup for Calibration dialog box appears.
IMPORTANT: The following list of media type conditions must be
updated for the new V1.5 ribbon media. Make each
update from the Printer Setup for Calibration dialog
box in the following order:
1. Reflective with XtraLife
2. Reflective without XtraLife
3. Fast Transparency (Kodak DS 8650 only)
4. Transparency
10. Select “Three-Color (CMY )” on the Ribbon Type drop-down menu.
11. Select the media type on the Print Mode drop-down menu as
specified in the above IMPORTANT note.
12. Select or deselect the XtraLife check box in the Printer Setup for
Calibration dialog box as specified for the media type that you are
updating (refer to the above IMPORTANT note).
13. Click on the Select button (located to the right of Media File).
14. Specify a media file for your particular printer.
D Kodak XLS 8600
Windows 8600V150.RTB
Macintosh Kodak XLS 8600 Media V150
D Kodak DS 8650
Windows 8650V150.RTB
Macintosh Kodak DS 8650 Media V150
15. Click on the OK button.
16. Select the Use Printer’s Default Table button in the Starting Point box
in the Calibration Table dialog box.
17. Click on the OK button.
A Calibration Document window appears.
18. Click on the Send button.