Kodak SCIENCE 1H9659 - Manual (Page 42)

Calibration Utility for MICROSOFT WINDOWS
1–34 September 1997 Part No. 1H9659
11. Click on the Send button if you are satisfied with the neutral in the cluster
you selected and you do not want to look at another calibration print.
A confirmation box appears.
12. Click on the Send button.
The recomputed table is sent to the printer and the following
message appears.
13. Click on the OK button.
The calibration table is computed using the specified values and
you return to the Calibration Document window. You should now
perform a Visual Linearity calibration.
NOTE: You should make another test print to verify your input
value adjustments.