Kodak SCIENCE 1H9659 - Manual (Page 23)

Calibration Utility for MICROSOFT WINDOWS
1–15 Part No. 1H9659 September 1997
4. Do one of the following:
D If you do not want to make another test print and you do not want
to save the calibration table, click on the
Exit button to quit the
Calibration Utility.
or
D If you want to save the calibration table, click on the Proceed
button to access a document window. Refer to “Using the
Calibration Document Window” on page 1–28.
Saving Your Calibration Table
You may want to save the calibration table you just created to use as a
starting point for later calibrations.
D Pull down the File menu and select Save to save changes to the
current calibration table.
D Pull down the File menu and select Save As to access a selection box
in which you can specify a new name and location for the current
calibration table.