Kenwood TK-3202 - Manual (Page 10)

4
1 Plug the AC adaptor cable into
the adaptor jack located on the
rear of the charger.
2 Plug the AC adaptor into an AC
outlet.
3 Slide the Ni-MH battery pack or
transceiver with a NiMH battery
pack into the charger.
•
Make sure the battery pack
terminals are in contact with
the charger terminals by
aligning the grooves of the
battery pack with the tabs of
the charger.
• The charger LED lights red
and charging begins.
4 When charging is completed, the
indicator lights green. Remove
the battery pack or the transceiver
from the charger.
•
It takes approximately 3 hours
to charge the battery pack.
• When the charger will not be
used for a long time, unplug
the AC adapter from the AC
outlet.