Kenwood TK-3202 - Manual (Page 24)

18
BACKGROUND OPERATIONS
T
IME
-
OUT
T
IMER
(TOT)
The purpose of the Time-out Timer is to prevent any caller
from using a channel for an extended period of time.
If you continuously transmit for a period of time that exceeds
the programmed time set by your dealer (default is 1 minute),
the transceiver will stop transmitting and an alert tone will
sound. To stop the tone, release the PTT switch.
Your dealer can program a warning function to alert you
before the TOT expires. Continuously transmitting for the
time specified by your dealer will cause the warning tone to
sound.
B
USY
C
HANNEL
L
OCKOUT
(BCL)
When activated, BCL prevents you from interfering with other
parties who may be using the same channel that you
selected. Pressing the PTT switch while the channel is in use
will cause your transceiver to emit an alert tone and
transmission will be inhibited (you cannot transmit). Release
the PTT switch to stop the tone and return to receive mode.
Note: Ask your dealer for an explanation on how BCL functions
when using QT, DQT, DTMF, or FleetSync signalling.
B
ATTERY
S
AVE
If activated by your dealer, the Battery Save function will
decrease the amount of power used when a signal is not
being received and no operations are being performed (no
keys are being pressed, and no switches are being turned).
While the channel is not busy and no operation is performed
for 5 seconds, Battery Save turns ON. When a signal is
received or an operation is performed, Battery Save turns
OFF.