Kenwood TK-3202 - Manual (Page 23)

17
4 Press the Side 1 key to increase
the VOX Gain level and the
Side 2 key to decrease the level.
•
The VOX Gain can be
adjusted from levels 1 to 10
and OFF.
• The transceiver announces
the VOX Gain level as you
adjust it. If OFF is selected, a
beep sounds.
5 Press the PTT switch to save the
setting.
•
A beep will sound.
• The transceiver announces
the new VOX Gain level.
6 Turn the transceiver power OFF
and the ON again to activate
VOX.
Note:
◆ If a speaker/ microphone is connected to the transceiver while
the VOX function is switched ON and the VOX Gain level is
configured to a higher, more sensitive level, louder received
signals may cause the transceiver to start transmission.
◆ When you operate the VOX function, you must use an optional
KHS-1 or KHS-21 accessory.
1