Kenwood TK-3202 - Manual (Page 27)

21
F
LEET
S
YNC
O
PERATION
FleetSync is a protocol owned by KENWOOD Corporation
and is enabled or disabled by your dealer. This function
opens the squelch only when the transceiver receives the
Fleet code and ID code programmed in your transceiver.
Calls that do not contain the correct codes will not be heard.
■ Receiving
When you receive a signal containing both your Fleet code
and your ID code, squelch opens and you will hear the
call.
•
An alert tone will sound.
• The LED indicator flashes orange.
• To mute the speaker after squelch opens, press the
key programmed as Monitor or Monitor Momentary.
■ Transmitting
To transmit a FleetSync signal, simply press the PTT
switch and make the call. If the selected channel has
been programmed with a FleetSync PTT ID, it will be
transmitted when the call is made.
B
EGINNING
/ E
ND OF
T
RANSMISSION
S
IGNAL
The Beginning of Transmission and End of Transmission
identification signals are used to access and release some
repeaters and telephone systems.
If Beginning of Transmission is set, the ID signal is transmitted
when you press the PTT switch.
If End of Transmission is set, the ID signal is transmitted when
you release the PTT switch.
If both are set, the ID signal is transmitted when you press
and release the PTT switch.