KVH Industries TracVision L2 - Manual (Page 2)

RJ11 Jack
(Data Cable to IRD - Optional)
Maintenance Port
(DB9 Connector)
Input Power
(+12 VDC)
Ground
Switchplate Mounting
Hole (1 of 2)
Data/Power Connector
1 54-0195 Addendum to Rev. A
TracVision L2 Owner’s Manual
Addendum
(ECO #6119)
The following information applies to Revision A of the
TracVision L2 Owner’s Manual (KVH Part Number 54-0195).
A protective cover has been added to the switchplate to guard against
damaging electrostatic discharges (ESD), which may occur during
installation.
2.3 Connecting System Components
Figure 2-11 and the template on the following page have been
changed to show the new switchplate cutout dimensions, which have
been widened to accommodate the protective cover.
Figure 2-13 shows the switchplate connectors as they appear within
the new cover.
2.5"
2"
Figure 2-11
Switchplate Cutout Dimensions
Figure 2-13
Switchplate Connectors