KVH Industries TracVision L2 - Manual (Page 21)

2-7
Installation
54-0195 Rev. A
14. Place the radome onto the baseplate (labels facing
the sides of the vehicle) and secure in place using
the 8 pan head screws and flat washers removed
in
Step 9 .
15. Drill the cable access hole (marked in Step 4 ) in the
vehicle’s roof.
Forward
Shipping Restraint
Rotating Plate
Shipping Restraint
Rotating Plate
Shipping Restraint
Figure 2-10
TracVision L2 Shipping Restraints
(Storage Position)
Installation Bolt and Washer
Rotating Plate Shipping Restraint (1 of 2)
Figure 2-9
Rotating Plate Shipping
Restraint Storage