Getting up and running, Charging the battery – Konica Minolta X50 User Manual

Page 14

Advertising
background image

14

G

ETTING UP AND RUNNING

GETTING UP AND RUNNING

CHARGING THE BATTERY

Before the camera can be used, the lithium-ion battery must be charged. Before charging
the battery, read the safety warnings on pages 3 and 4 of this manual. Only recharge the
battery with the supplied battery charger. The battery should be recharged before each
shooting session. See page 103 for battery care and storage.

1

With the battery terminals forward lower the battery into the
charger so the guides in the charger bed enter the channels
on the battery. Slide the battery forward into the charger.

Plug the power cord into the back of the charger unit (1).
Plug the other end of the cord into a live household outlet.
The included AC cord is designed for the current of the
sales region. Only use the cord in the region it was
purchased. For more on the AC cable, see page 101.

2

The indicator lamp (2) glows to show the battery is charging. The
lamp goes out when the battery has been charged. Charging
time is approximately 90 minutes. Remove the battery from the
charger. Unplug the power cord from the outlet.

Advertising