Konica Minolta X50 - Manual (Page 99)

Refer to the applications instruction manual on how the view
the remote feed. With Microsoft Net Meeting, simply click on
the play button. The option dialog box allows remote control
over some of the camera’s functions. By clicking on
the source button in the video tab, zoom and focus
controls can be accessed; the controls are located
on the camera control tab of the dialog
box. Image magnification can be
adjusted with the zoom slider. Clicking
the auto check box on the focus option
focuses the camera. However, focus is
not continuous and the box must be
checked each time focusing is
required.
99
NOTES ON REMOTE CAMERA OPERATION
When using the remote camera, exposure, white balance, and camera sensitivity are set
to auto. The optical and 4.3X digital zoom are active. There are no menu controls. The
monitor cannot be turned off. The flash is disabled. There is no audio.
The camera can be focused periodically by pressing the
shutter-release button partway down. The AF system does
not continually focus when the button is pressed and held so
the operation should be repeated as the subject distances
changes.
Because of the data rate, there may be delays when the
camera is focused or zoomed.