Konica Minolta X50 - Manual (Page 50)

50 R ECORDING - ADVANCED OPERATION
DATE IMPRINTING
Every time a still image is recorded, it is stored with an exif tag that contains the date and time of
recording as well as shooting information. This information can be viewed with the camera in the
playback mode, or on a computer with the DiMAGE Viewer software.
Camera Notes
The date and time of recording can be printed directly on a
still image. The imprinting function must be activated before
the image is taken. Once activated, the date will continue to
be imprinted until the function is reset; a yellow bar is
displayed behind the frame counter on the monitor to
indicate the imprinting function is active.
Date imprinting is activated with section 3 of the recording
menu (p. 40). Date imprinting has two menu options. The
YYYY/MM/DD option prints the date. The MM/DD/hr:min
option prints the month, day, and time of recording.
The date and time are imprinted in the lower right corner of
the image when viewed horizontally. It is printed directly on
the photograph writing over the image information. The
date can be imprinted in three formats: year / month / day,
month / day / year, and day / month / year. The date and
date format are set in section 3 of the setup menu (p. 70).
Date-imprinting indicator