Konica Minolta X50 - Manual (Page 85)

85
E-mail Copy images are placed in a folder ending in “EM.” When a new folder is created,
the first three digits in the folder name will be one greater than the largest folder number
on the card. When the index number in the image file name exceeds 9,999, a new folder
is created with a number one greater than the greatest folder number on the memory
card: e.g. from 100KM007 to 101KM007.
The number in the image file name may not correspond to the frame number of the
image. As images are deleted in the camera, the frame counter will adjust itself to show
the number of images on the card and reassign the frame numbers accordingly. The
serial numbers used with image files will not change when an image is deleted. When a
new image is recorded, it will be assigned a number one greater than the largest serial
number in the folder. File serial numbers can be controlled with the file-number-memory
function in section 1 of the setup menu (p. 73).
Image files contain exif tag data. This data includes the time and date the image was recorded as
well as the camera settings used. This data can be viewed with the camera or the DiMAGE
Viewer software. If a camera image is opened in a image-processing application that does not
support Exif tags, and then the image is saved overwriting the original data, the exif tag
information is erased. Some Exif compatible applications rewrite the Exif data preventing the
DiMAGE Viewer from reading it. When using software other than the DiMAGE Viewer, always
make a backup copy of the image files to protect the exif tag data.
To view images correctly on your computer, the monitor’s color space may need to be adjusted.
Refer to your computer manual on how to calibrate the display to the following requirements:
sRGB, with a color temperature of 6500K, and a gamma of 2.2.
Camera Notes
AUTO POWER SAVE - DATA-TRANSFER MODE
If the camera does not receive a read or write command within ten minutes, it will shut
down to save power. When the camera shuts down, an unsafe-removal-of-device
warning may appear on the computer monitor. Click “OK.” Neither the camera or
computer will be damaged in this operation. Unplug the USB cable and turn off the
camera. Remake the USB connection by reattaching the cable and turning the camera
on.