Konica Minolta X50 - Manual (Page 29)

29
FLASH RANGE - AUTOMATIC OPERATION
The camera automatically controls the flash output. For well-exposed images, the subject
must be within the flash range. Because of the optical system, the flash range is not the
same at the lens’ wide-angle position as it is at the telephoto position. The flash range
can be changed with camera sensitivity (ISO), see page 46.
FLASH SIGNALS
The indicator lamp next to the viewfinder indicates the status of
the flash. When the lamp is orange and blinks quickly, the flash
is charging and the shutter will not release. The lamp glows
steadily for three seconds when the flash is charged.
Wide-angle position Telephoto position
0.2m ~ 3.2m (0.6 ft. ~ 10.5 ft.) 0.1m ~ 1.8m (0.4 ft. ~ 5.9 ft.)
The display button controls the LCD monitor display. The display cycles to the next
position each time the button is pressed: full display, live image only, and monitor off. The
monitor cannot be turned off for movie/audio recording. If the display button is pressed
and held, the LCD-brightness adjustment screen is displayed, see page 72.
Full display Live image only
DISPLAY BUTTON - RECORDING MODE
Monitor
off