Konica Minolta X50 - Manual (Page 73)

73
If file number memory is selected, when a new folder is created, the first file stored in the
folder will have a number one greater than the last file saved. If the file number memory
is disabled, the image file number will be 0001. File number memory is activated in
section 1 of the setup menu (p. 70).
If file number memory is active and the memory card is changed, the first file saved to
the new card will have a number one greater than the last file saved on the previous card
if the new card does not contain an image with a greater file number. If it does, the file
number of the new image will be one greater than the greatest on the card.
FILE NUMBER (#) MEMORY
FOLDER NAME
All recorded images are stored in folders on the memory card. Folder
names come in two formats, standard and date.
Standard folders have an eight character name. The initial folder is
named 100KM007. The first three digits are the folder’s serial number,
which will increase by one each time a new folder is created. The next
two letters refer to Konica Minolta, and the last three numbers indicate
the camera used; 007 indicates a DiMAGE X
50
.
A date folder name also starts with the three digit serial number and is
followed by one register for the year, two register for the month, and
two registers for the day: 101YMMDD. The folder 10140824 was
created in 2004 on August 24th.
With the date folder format selected, when an image is recorded a new folder with the
day’s date will be created. All images recorded that day are placed in that folder. Images
recorded on a different day are placed in a new folder with the corresponding date. If the
file number memory function is off, when a new folder is created, the serial number in the
image-file name is reset to 0001. If file number memory function is on, the serial number
in the image-file will be one greater than the last image saved. For more information on
folder organization and file names, see page 84.
100KM007
(Standard)
10140824
(Date)