Kodak 6B7198 - Manual (Page 76)

Using the Long Roll Accessory
D-12 May 2002
Installing the Aperture Plate
IMPORTANT: To power on the scanner without error, an aperture plate must be
installed, latched, and locked.
1. Choose the aperture plate corresponding to the film format you will be
scanning.
2. Position the aperture plate with the lettering (example: 120/220) visible on the
left side.
CAUTION: Installing an aperture plate backwards may result in a
damaged light bar.
3. Make sure the gate actuator is unlatched for film loading.
4. Center the aperture plate on the lamphouse cover.
5. Gently lower the aperture plate and, when you feel resistance, push until it is
secured.
P192_1544AC
120/220
P192_1544ACA
lettering on left side
P192_1547AC
plate
aperture
P192_1547ACA