Reset data after job – Konica Minolta 7235 User Manual
Page 209
8-2. Scanner Initial Settings
IV Scanner Key Operator - Administrators only
200
Chapter 8 Key Operator Settings
Reset data after job
This sets whether or not to reset the settings after scanning data.
z
The factory default is [YES].
1
Select [Reset data after job] in [Initial setting] screen.
When you touch the [
] or [
] key, the selection item is switched.
z
For details on the procedure for displaying the [Initial setting] screen, refer to [Switching the Key Operator Mode]
(
2
Touch the [EDIT] key, then change the setting.
Each time you touch the [EDIT] key, the setting is switched.
[YES] : All the settings are reset after the upload and the display returns to the address selection
screen.
[NO]
: Scanning continues with the same settings.
3
Touch the [RETURN] key.
From now on, the copier operates with these settings.