Konica Minolta 7235 - Manual (Page 65)

4-7. FTP Setup
II Network Setup - Administrators only
56
Chapter 4 Setting from the Control Panel
FTP Setup (Part 2 of 2)
1
Use [ ] or [ ] to access to [FTP Setup] screen (2/2) from screen (1/2).
z For details on the procedure for displaying the [Network setting] screen, refer to [4-2.Method for Setting Network from
Control Panel] (
Page 23).
FTP Client Port Number
This specifies a port number to use for communicating with the FTP server.
● Changing the Port Code in an improper manner can result in damage to the network. Do not change the
Port Code unless it is necessary to do so.
1
Touch the [FTP Client Port No.] key.
2
Using the control panel, enter a number between 1 and 65535.
z The factory default setting is [21].
Connection Timeout
This function automatically stops the upload if communications bog down during data uploading to the
FTP server and a certain period of time elapses.
[Conncetion Timeout] sets this time value.
1
Touch the [Connection Timeout] key.
2
Using the control panel, enter the number of seconds for timeout between 5 and 300.
z The factory default setting is [60] seconds.