Mdn request, Response timeout for mdn/dsn, Mdn response – Konica Minolta 7235 User Manual

Page 80

Advertising
background image

4-10. E-Mail Extended Config

71

II Network Setup - Administrators only

Chapter 4 Setting from the Control Panel

MDN Request

This enables setting whether or not to request the receiver for sending MDN (Message Disposition Noti-
fications) to the sender when the receiver opens the received E-mail message.

1

Touch the [YES] or [NO] keys on the [MDN Request] menu.
[YES] : Requests MDN.
[NO]

: Does not request MDM

z

The factory default setting is [YES].

● Even if a MDN is requested, the MDN response mail cannot be received by the sender if receiver does

not support the MDN function or receiver has disabled the response function.

Response Timeout for MDN/DSN

This enables setting time for waiting for a response when a transmission result is requested.

1

Input the time between 0 to 99 hours using the ten-key on the control panel.

● In cases when no response is received after the Response Timeout for MDN/DSN has elapsed, nothing

is registered in the communication status report even when a response is received later.

z

The factory default setting is [24] hours.

z

For the output method for the communication status report, refer to the "User's Guide (Internet Fax/Facsimile)".

MDN Response

This enables setting whether or not to send a reception result response E-mail when a MDN transmis-
sion is requested by the sender.

1

Touch the [YES] or [NO] keys on the [MDN Response] menu.
[YES] : Sends E-mail for reception result response.
[NO]

: Does not send E-mail for reception result response.

z

The factory default setting is [Yes].

Advertising
This manual is related to the following products: