Konica Minolta 7235 - Manual (Page 123)

II Network Setup - Administrators only
114
Chapter 5 Web Utility
5-12. LDAP Configuration
This sets the information required for accessing the LDAP server to acquire mail addresses for [Scan to E-
Mail]. Password input is necessary to configure settings.
● If the LDAP configuration is not set up correctly, network problems could occur. This setup process must
be performed only by the server administrator.
z In order to alter any of the fields that follow, a password is required. The default password for Web Utilities is "key
operator password".
To access the LDAP Configuration page, follow these steps:
1
Open the Network Setup page.
2
From the top menu, select LDAP Configuration page. The LDAP Configuration page
opens.