Konica Minolta 7235 - Manual (Page 32)

23
II Network Setup - Administrators only
Chapter 4 Setting from the Control Panel
4-2. Method for Setting Network from Control Panel
This explains how to set the network connection using the control panel and LCD screen.
● After the network settings have been changed, a message "To valid the data, please turn OFF main SW
and ON" may appear on the touch panel. If this message is displayed, be sure to switch the main power
for the copier OFF and wait at least 10 seconds, then turn it back ON.
1
Press the (COPY) button on the control panel.
→ The [Copy basic mode] screen is displayed on the LCD screen.
2
Press the (HELP) button on the control panel, then press the [Key Ope mode] key.
→ The [HELP MODE] screen is displayed on the LCD screen.