KORG MP-10 PRO - Manual (Page 137)

The Voice Processor Setup 133
3. Touch the SETUP button to go to the Setup page .
4. Touch the Dyn . pop-up menu, and choose whether to apply compression to
the lead voice alone, the harmony voices, or both .
5. Use the knobs to edit each compressor parameter, as explained in the fol-
lowing table .
Parameter Meaning
Thresh(old) Dynamics level where the compressor starts to work. Range: -60 dB (only
occasionally engaged) to 0 dB (constantly engaged).
Ratio Amount of compression, when the compressor is engaged. Range: 1.1:1
(minimal compression) to 64:1 (heavy compression).
Gate Cuts-out all signals (for example, noise floor or ‘pops’) under the assigned
value. Range: Off, -70dB to 0dB.
6. Touch the SAVE command to save the settings to a Voice Processor Setup
(more info below) .
7. Press the EXIT button to return to the main screen .