KORG MP-10 PRO User Manual
Page 140
136
Part 8: The Microphone
3.
Touch the SETUP button to go to the Setup page .
4.
Touch the MIC 1 or MIC 2 tab to select the EQ that will be applied to the
corresponding microphone input .
5.
Use the knobs to edit the EQ parameters, as explained in the following
table .
Parameter
Meaning
Low – Level
Level of the low-frequency band.
Low – Frequency
Center frequency of the low-frequency band.
Mid – Level
Level of the mid-frequency band.
Mid – Q
Width of the mid-frequency band. A narrower band means a more
precise corrective action.
Mid – Frequency
Center frequency of the mid-frequency band.
High – Level
Level of the high-frequency band.
High – Frequency
Center frequency of the high-frequency band.
6.
Touch the SAVE command to save the settings to a Voice Processor Setup
(more info below) .
7.
Press the EXIT button to return to the main screen .