KORG MP-10 PRO - Manual (Page 33)

Audio connections 29
Adjusting the volume levels
You can adjust the final volume while listening to the demo Songs.
1. For safety reasons, before setting the levels you should lower both the vol-
ume of the MP-10 PRO and the amplification system.
• Lower the volume of the external amplification system (please refer to the
amplifier’s owner manual for the relevant instructions).
• Lower the main volume of the MP-10 PRO by turning the MASTER
VOLUME knob counter-clockwise .
• Lower the headphone volume by turning the HEADPHONE VOLUME
knob (next to the headphones connector) counter-clockwise . This is inde-
pendent from the master volume, so that you can still listen at a moderate
volume, while topping the volume on the main speakers .
2. To adjust the output volume, you should ‘feed’ some audio signal to the
audio outputs . So, let’s start the demo Songs contained in the playlist that
you can see in the right area of the main screen .
Play mode icon
Demo
Song’s
playlist