KORG MP-10 PRO - Manual (Page 195)

Editing the Sounds 191
8. For each track, use the knobs to edit the various Sound parameters .
Parameter Meaning
Attack Time taken to reach the maximum level of the sound once the key is
pressed.
Decay Time needed to go from the maximum sound level (at the end of the at-
tack) to the sustaining level.
Release Time needed to go from the release of the key, to silence.
Cutoff Filter cutoff, or brightness of the Sound.
Resonance Resonance of the filter.
LFO Depth Intensity of the vibrato.
LFO Speed Speed of the vibrato.
LFO Delay Delay before the vibrato engages.
9. If you want to recall the original values for the current track, touch the
Reset Track command .
10. If you want to recall the original values for all the tracks, touch the Reset
All command .
11. When you’re done, press the SAVE command .
12. Press the EXIT button to return to the main screen .