KORG MP-10 PRO - Manual (Page 37)

Audio connections 33
3. Touch the pop-up menu and choose a limiter or any other effect from the
menu .
Effect Parameters
Stereo Limiter The limiter regulates the input signal level, by compressing any
signals exceeding the specified threshold level, thus bringing
signal peaks under control.
Stereo Mastering Limiter As above, optimized for mastering Songs.
Stereo Parametric EQ A stereo 4-band parametric equalizer.
Stereo Graphic EQ A stereo 7-band graphic equalizer.
Stereo Exciter/
Enhancer
This effect combine an exciter, which adds some punch to the
sound, and an enhancer, which adds spread and presence.
Stereo Flanger This effect gives a significant swell and movement of pitch to
the sound. It is more effective when applied to a sound with a
lot of harmonics. This is a stereo flanger.
Stereo Phaser This effect creates a swell by shifting the phase. It is very effec-
tive on electric piano sounds.
Stereo BPM Delay A stereo delay matching the Song tempo.
Stereo Analog Record This effect simulates the noise caused by scratches and dust
on analog records. It also reproduces some of the modulation
caused by a warped turntable.
High Cut A filter to cut out the high frequencies, in case you want a mel-
lower sound.
4. Touch the On/Off button to make the checkmark appear and turn the Master
FX (i .e ., the chosen limiter) on .
5. When done, press the SAVE command to save the settings into the Global
preferences .
6. Press the EXIT button to return to the main screen .