KORG MP-10 PRO - Manual (Page 185)

Programming the Pads/Switches 181
4. If you want the buttons to act as Pads, leave the Switch Mode box un-
checked . If you want them to work as Assignable Switches, check the box .
5. Touch the SAVE command to save the new settings into the current Pad
Set .
6. Press the EXIT button to return to the main screen .
Assigning Hits or Sequences to the Pads
You can assign Hits or Sequences to the Pads, and save them into a Pad Set .
1. Press the MIXER button to access the Mixer Menu .
2. Touch the PADS Settings button to access the Pads Settings section .
3. Touch the PAD SET ( ) button to access the Pad Set page .
As an alternative, you can always access this page by keeping the QUICK
ACCESS KEY pressed and pressing any of the Pad buttons .